PGT23.100德國威卡wika壓力表上海

描述：PGT23.100/PGT23.160 德國威卡wika壓力

智能型波登管壓力表帶電信號輸出，不銹鋼系列，安全型，表圓直徑 100，160
型號：PGT23.100/PGT23.160

產品型號：PGT23.100
廠商性質：代理商
更新時間：2017-07-17
訪問量：2491

產品咨詢聯系我們

產品介紹/ PRODUCT PRESENTATION

PGT23.100/PGT23.160 德國威卡wika壓力

智能型波登管壓力表帶電信號輸出，不銹鋼系列，安全型，表圓直徑 100，160

型號：PGT23.100/PGT23.160

應 用

Acquisition and display of process values

Transmission of process value to the control room, 4 ... 20 mA; 0 ... 20 mA; 0 ... 10 V

Easy-to-read, local analogue display needs no power supply

Safety-related applications

特別功能

„Plug and play“ means no configuration necessary

Signal transmission in accordance with Namur

Measuring ranges from 0.6 bar to 1000 bar

Easy-to-read, Ø 100 mm analogue display

S3 Safety pressure gauge per EN 837-1

inliGAUGE Model PGT23.100

詳細

Nominal size
100 mm

Accuracy class
Class 1.0

Display range
0 … 0.6 up to 0 … 1000 bar
including all corresponding ranges for negative and/or negative and positive/compound pressure

Wherever the process pressure has to be indicated locally,and, at the same time, signal transmission to a central controller or remote control room is wanted, the PGT23.100 inliGAUGE can be used.
Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The PGT23.100 inliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical pressure indication can thus be saved.

The PGT23.100 is built upon a high-quality, stainless steel pressure gauge with a 100 mm nominal size. The pressure gauge is manufactured in accordance with EN 837-1.

The durable, fully-welded Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore compley free from wear and friction. From this, the pressure-proportional, 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality Model 23x.30 mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.

The measuring span （electrical output signal） is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.

________________________________________________________

Accessory: Power supply for top hat rail